| | | | | | |
| | |
| | | | | |
| | | | | |
| | | | | |
| | | | |
| | |
| | | | | | | |
| | | | | | | |
| 规格表： | | | | | |
| 机械型号 Machine Type | Unit | KC-R-350 |
| 射出系统 | 螺杆直径 Screw diameter4045 | mm | 32 | 38 | 42 |
| 射出压力 Injection pressure | kg/cm2 | 2050 | 1454 | 1190 |
| 理论射出容量 Theoretical Shot Volume | cm3 | 113 | 158 | 194 |
| 射出重量 (P.S.) Injection weight(P.S.) | g | 103 | 144 | 177 |
| oz | 3.6 | 5.1 | 6.2 |
| 射出率 Injection rate | cm3/sec | 48 | 68 | 83 |
| 螺杆行程 Screw Stroke | mm | 140 |
| 螺杆转速 Screw speed | r.p.m | 0-175 |
| 射嘴接触力 Nozzle Contact force | tons | 3.9 |
| 射嘴行程 Nozzle Retraction Stroke | mm | 130 |
| 温度控制段数 No.of heating zones | / | 3 |
| 料斗容量 Material Hopper Capacity | l | 25 |
| 锁模系统 | 锁模力 Clamping Force | tons | 45 |
| 开模力 Opening Force | tons | 8.3 |
| 模板尺寸 Mold plate dimension | mm | 420*270 |
| 转盘直径 Rotary Table Diameter | mm | -- |
| 最小模厚 Min mold thickness | mm | 175 |
| 开模行程 Opening stroke | mm | 200 |
| 最大开模距离 Max. daylight opening | mm | 375 |
| 顶出力 Ejector force | tons | 1.3 |
| 顶出行程 Ejector stroke | mm | 75 |
| 滑模系统 | 滑模行程 Slide stroke | mm | 270/480 |
| 圆盘站数 Rotary Station | | ┈ | -- |
| 最大模具重量 Max Mold Weight | kg | 120 |
| 滑模定位精度 Station Clearance | mm | ±0.02 |
| 油压电力系统 | 最大液压压力 Max.Hydraulic Pressure | kg/cm2 | 140 |
| 泵浦吐出量 Pump Output | liters/min | 43 |
| 作动油量 Oil Reservoir Capacity | liters | 200 |
| 冷却水用量 Cooling Water Consumption | liters/hr | 800-1000 |
| 油压马达电力 Pump Motor Power | kw | 7.5 |
| 电热容量 Barrel Heating Power | kw | 5.5 |
| 总用电量 Total Wattage | kw | 13 |
| 其它 | 机械重量（约） Machine weight(about) | tons | 3.1/3.5 |
| 机械外型尺寸 Machine dimension(L*W*H) | m | 2.8*1.05*2.05 |
| 付船重量 Shipping Weight | tons | 3.5/4.3 |
| 付船尺码 Shipping Measurements(L*W*H) | m | 3.0*1.25*2.25 |